Cut list optimizer
Lay out the parts you need on the boards or sheets you have, with saw kerf, and see the offcuts and waste.
Stock you have
Leave the count blank for as many as it takes.
Parts you need
Lengths take tape measure math: 8', 29 1/4", 2' 6, 1220mm.
Layout
4 × 8' 0" · 22.2% waste
Board 1 · 8' 0"Offcut 3 1/8"
Long apron4' 0"Stretcher3' 8 3/4"Board 2 · 8' 0"Offcut 18 5/8"
Long apron4' 0"Leg2' 5 1/4"Board 3 · 8' 0"Offcut 8"
Leg2' 5 1/4"Leg2' 5 1/4"Leg2' 5 1/4"Board 4 · 8' 0"Offcut 4' 6 7/8"
Short apron20 1/2"Short apron20 1/2"
A quick greedy layout; it's usually close to the best, not always the best. Check twice, cut once.
- #shop
- #woodworking
- · runs in your browser
Try next
- Tape measure calculatorAdd, subtract and divide feet, inches and fractions like 3' 5 5/8", rounded to the nearest 1/16 or finer.
- Unit converterConvert length, weight, temperature, volume, area, speed, data and time, all at once.
- Aspect ratio calculatorSimplify any size to its ratio, and resize to a ratio without doing the math.